The full list of projects contains the entire database hosted on this portal, across the available directories. The projects and activities (across all directories/catalogs) are also available by country of origin, by geographical region, or by directory.

Displaying: 1 - 14 of 14
1. ENVISAT AO ID 130: Global study of inorganic chlorine and fluorine loading in the Earth’s atmosphere, based on correlative measurements by ENVISAT-1 and at 10 NDSC sites

The project aims at producing an ENVISAT-1 mission-long monitoring of the inorganic chlorine (Cly) and fluorine (Fy) loading in the Earth’s middle atmosphere, based on FTIR vertical column abundance measurements of the key related species HCl, ClONO2, HF and COF2 at 10 ground-based NDSC sites distributed worldwide. These Cly and Fy inventories will be completed with ClO and OClO measurements expected as Level-2 products from ENVISAT-1. The column abundances of the source gases CFC-12 and HCFC-22 will be used to place the stratospheric Cly and Fy evolution in perspective with the more complete sets of organic chlorinated and fluorinated compounds measured at the ground by the in situ networks NOAA-CMDL and AGAGE. The assimilation of the retrieved geophysical data bases will be performed through 3-D model calculations incorporating physical, chemical and transport characteristics of the global atmosphere.

Atmospheric processes Sources Ozone Climate variability NDSC Spatial trends Pollution sources Climate change Emissions Atmosphere Temporal trends satellite validation
2. ENVISAT AO - ID:158: CINAMON: Characterisation, INterpretation, Application, and Maturation of key Ozone-related ENVISAT-1 level-2 products, using correlative observations associated with the NDSC

The present project aims at the geophysical validation, from pole to pole and on the long term, of key ozone-related level-2 products (O3, NO2, BrO, OClO, and ClO) from GOMOS, MIPAS and SCIAMACHY onboard ENVISAT-1, and at a contribution to the maturation of the related level-1b-to-2 data processors. Application data processing will be used to convert level-2 data into a more suitable format for validation and scientific end-users. The respective performances of the ENVISAT data products, and their sensitivity to various relevant parameters, will be investigated from the Arctic to the Antarctic, over a variety of geophysical conditions. The impact of these performances on specific atmospheric chemistry studies will be emphasised. The pseudo-global investigations will rely on correlative studies of ENVISAT data with high-quality ground-based, in situ and balloon observations associated with the Network for the Detection of Stratospheric Change (NDSC).

Atmospheric processes Sources Ozone Climate variability NDSC Spatial trends Pollution sources Climate change Emissions Atmosphere Temporal trends satellite validation
3. ENVISAT AO - ID:126: Validation of ENVISAT-1 level-2 products related to lower atmosphere O3 and NOy chemistry by an FTIR

The project will provide a long-term, pseudo-global validation support to the ENVISAT-1 atmospheric measurements, based on mutually consistent high-quality solar and lunar observations from FTIR spectrometers operated at primary and a number of complementary NDSC stations. The validation is limited to a number of target species, most of which are primary NRT or OL level-2 products of the mission, with focus on NOy components: O3, NO2, NO, N2O, HNO3, HNO4, H2CO, CO and CH4. Synergistic use will be made of column and profile data from MIPAS, GOMOS and SCIAMACHY. The ground network will deliver mean vertical column abundances for all target species with NDSC-type quality, and height profile information for some target gases as secondary products to the PI's home institute, where the correlative analyses with the ENVISAT-1 products will be done. Asynoptic mapping tools will support the validation efforts.

Atmospheric processes Sources Ozone FTIR Mapping Climate variability NDSC Spatial trends Pollution sources Climate change Emissions Atmosphere Temporal trends satellite validation
4. QUILT: Quantification and Interpretation of Long-Term UV-Vis Observations of the Stratosphere

The aim of QUILT is to optimise the exploitation of the existing European UV-visible monitoring systems by which O3 and the related free radicals NO2, BrO and OClO can be measured. These monitoring systems include ground-based, balloon and satellite observations. QUILT is providing an assessment of the chemical ozone loss over the last decade and through 2000-2003. This is achieved through analysis improvements, consolidation of existing datasets and near real time integrations with chemical transport models.

Atmospheric processes Sources Ozone Stratospheric Ozone Montreal Protocol Climate variability Spatial trends Pollution sources UV-Visible Remote Sensing Climate change Modelling Emissions Atmosphere Temporal trends Satellite Validation
5. COSE: Compilation of atmospheric Observations in support of Satellite measurements over Europe

The overall objective of COSE is to provide the Earth Observation (EO) user community with a validated, consistent and well-documented data set of mainly stratospheric constituent columns and/or profiles, by co-ordination of ground-based observations at existing stations in Europe. The data set builds on past and ongoing time series, and will be archived in a dedicated database for immediate and future exploitation, e.g., satellite validation activities, data assimilation and scientific studies. Active participation of some representative EO customers will assure that the delivered data sets come up to their requirements.

Atmospheric processes Sources Ozone network observations database Climate variability Atmospheric chemistry monitoring Spatial trends Pollution sources Climate change Modelling Emissions data documentation and user exploitation Data management Atmosphere Temporal trends satellite validation
6. Satellite validation for SAGE III (contribution to VINTERSOL/SOLVE-2)

In december 2001 the SAGE III experiment was successfully launched. The NASA science team of the SAGE III experiment has announced the Koldewey-Station in Ny-Aalesund as "anchor site" for validation, especially for such parameters as optical depth, aerosol extinction profiles and ozone profiles. Because of time coincidence NASA apprechiates support for the prospected validation activities for ENVISAT. This should be also considered as contribution to the NASA accepted project "Ground based Validation of SAGE III by the NDSC Primary Station at Ny-Ålesund, Spitsbergen" for SOLVE-2.

Ozone Climate variability SAGE III Climate change Arctic satellite validation
7. SOLVE: SAGE III Ozone Loss and Validation Experiment

In preparation to the launch of the SAGE III experiment in March 2001, NASA and the European Union performed the SOLVE / THESEO-2000 campaign, which had three components: (i) an aircraft campaign using the NASA DC-8 and ER-2 airplanes out of Kiruna/Sweden, (ii) launches of large stratospheric research balloons from Kiruna, (iii) validation excercises for the commissioning phase of SAGE III. The German Arctic research station Koldewey in Ny-Ålesund/Spitsbergen contributes to (i), (ii), and (iii) by performing measurements of stratospheric components like ozone, trace gases, aerosols (PSCs), temperature and winds. The measurement results were transmitted quasi online to the flight planning center in Kiruna, in order to allow a better directing of the air plane flights. In addition the Koldewey-Station has been designated a validation anchor site for the SAGE III validation. The activities are organized within a NASA accepted proposal of ground-based validation support by the NDSC Primary Station at Ny-Ålesund, Spitsbergen and by a SAGE III validation working group for Ny-Ålesund. The main observation periods are from December 1999 to March 2000.

Atmospheric processes Ozone UV radiation trace gases Climate variability Climate SAGE III Climate change aerosol THESEO-2000 PSCs Atmosphere satellite validation
8. BIRD satellite validation

The German Aerospace Center (DLR) Bi-spectral Infrared Detection (BIRD) small satellite is a technology demonstrator of new infrared push-broom sensors dedicated to recognition and quantitative characterisation of thermal processes on the Earth surface. BIRD was successfully piggy-back launched on October 22, 2001 with an Indian Polar Satellite Launch Vehicle (PSLV-C3) into a circular sun-synchronous orbit with an altitude of 572 km and a North - South local equator crossing time at 10:30 h. Besides cameras working in the visible and near infrared spectral range there are two cameras working in the middle infrared (MIR, 3.4 – 4.2 µm) and in the thermal spectral range (TIR, 8.5 – 9.3 µm) respectively. The objective is to validate these two cameras in cooperation with the Koldewey-Station in Ny-Ålesund. Therefore meteorological and aerological data as well as radiation measuring data will be used.

Atmospheric processes Vegetation fires Mapping Clouds Fire maps Spatial trends Forest damage Industrial hazards Hot spots Atmosphere Temporal trends Volcanic activities Vegetation changes Satellite validation
9. SCIAMACHY validation with FTIR

The aim of the project is to perform solar and lunar absorption measurements of atmospheric trace gases for the valdation of the SCIAMACHY satellite. Besides the routine observations within the NDSC it is planned to perform more intense measurements, especially during the satellite overpasses.

Atmospheric processes Ozone FTIR Trace gases Climate variability Stratosphere Climate NDSC Climate change Arctic SCIAMACHY Atmosphere Troposphere Satellite validation
10. DOAS measurements of atmospheric trace gases (NDSC)

Quasi-continuous observation of several atmospheric species are performed by measuring the absorption of visible and near ultraviolet sunlight scattered from the sky or in direct moonlight. Column abundance of molecules such as ozone, NO2, OClO, NO3, BrO, HCHO and IO are derived by means of a Differential Optical Absorption (DOAS) algorithm and a radiative transfer model. These activities are part of calibration and validation studies of different satellite experiments (GOME, SAGE III, SCIAMACHY). Since 1999 the instrument is part of the Network of the Detection of Stratospheric Change (NDSC). The instrument has been installed in 1995 as the second UV/vis instrument from the Institute of Environmental Physics. One similar setup in Bremen is continuously running with the exception of short maintenance breaks since 1993.

Atmospheric processes Ozone Trace gases Climate variability Climate NDSC Climate change Arctic DOAS Atmosphere Satellite validation
11. Trace gas measurements by Fourier Transform Infrared Spectroscopy (NDSC)

The FTIR (Fourier Transform Infrared Spectroscopy) has been established as a powerful tool for measurements of atmospheric trace gases. Using the sun or moon as light source, between 20-30 trace gases of the tropo- and stratosphere can be detected by their absorption features. The analysis of the spectra allows to retrieve the total zenith columns of the trace gases. For a few trace gases the pressure broadening of the lines allows to get additionally some information on the vertical concentration profiles. Some important trace gases cannot be detected in the IR but in the UV/VIS. This makes it useful to record the whole spectral region from the IR from about 700/cm (14 µm) to the UV at 33000/cm (300 nm).

Atmospheric processes Ozone OH concentrations Arctic haze Trace gases Climate variability Climate Climate change Arctic Atmosphere Satellite validation
12. Microwave observations of stratospheric trace species in Ny-Ålesund

Microwave radiometers are part of the standard instrumentation at primary NDSC stations and are due to their long-term stability and self calibrating technique especially useful for monitoring purposes. Altitude profiles are retrieved from the shape of the pressure broadened thermally induced emission line of the observed species. The instruments for the observation of stratospheric ozone, chlorine monoxide and water vapour at the Koldewey Station in Ny-Ålesund were developed at the University of Bremen and upgrades and improvements are regularly carried out. The instruments have been automated during recent years and ozone and water vapour observation on Spitsbergen are carried out all year round. Chlorine monoxide is only observed in late winter and early spring, when enhanced concentrations in the lower stratosphere are to be expected. Routine operation and maintenance are done by the station engineer. Data analysis is carried out at the University of Bremen.

Atmospheric processes Ozone Climate variability Climate Chlorine monoxide Climate change Arctic Water vapour Atmosphere Satellite validation
13. Radiation measurements in framework of the Surface Radiation Network - BSRN

The Baseline Surface Radiation Network (BSRN) is a cooperative network of surface radiation budget. Measurement stations operated by various national agencies and universities under the guiding principle set out by the World Climate Research Programme (WCRP). Presently about 15 stations have been established, one of them is Ny-Ålesund. The concept for a Baseline Surface Radiation Network has developed from the needs of both the climate change and satellite validation communities. The aims of the programme are the monitoring of long-term trends in radiation fluxes at the surface and the providing validation data for satellite determinations of the surface radiation budget. The BSRN station Ny-Aalesund was installed in summer 1992 and is regularly operating since August 1992.

Atmospheric processes Ozone UV radiation Climate variability Climate Climate change Arctic Atmosphere Satellite validation
14. Validation of SAGE III satellite data

SAGE III was successfully launched on 10. Dec. 2001 on a Russian M3 rocket. It provides accurate data of aerosols, water vapour, ozone, and other key parameters of the earth's atmosphere. The science team of the SAGE III experiment at NASA has nominated the Koldewey-Station as an anchor site to contribute within the Data Validation Plan as part of the Operational Surface Networks. Data directly relevant to the SAGE III validation are aerosol measurements by photometers and lidar, as well as temperature measurements and ozone profiling by balloon borne sondes, lidar and microwave radiometer. Data will be provided quasi online for immediate validation tasks.

Atmospheric processes ozone UV radiation trace gases Geophysics Climate variability Climate Climate change aerosol water vapour Data management Atmosphere water vapor satellite validation